Connection Settings; Access Points; Packet Data; Packet Data Settings - Nokia E50 User Manual

S e t t i n g s
Call waiting — Select Activate
•
if the function is active on the network.
Reject call with SMS — Select
•
cannot answer their incoming call.
Message text — Enter the text that is sent when you cannot answer an incoming call and want to automatically send a text
•
message as a reply.
Automatic redial — Select
•
attempts to connect the call.
Summary after call — Select
•
Speed dialling — Select
•
keys (2-9), press and hold the key.
See "Speed dial," p. 21.
Anykey answer — Select
•
Line in use — Select Line 1
•
setting is displayed only if the SIM card supports the alternate line service and a subscription to two phone lines.
Line change — Select Disable
•

Connection settings

Select Menu Tools Settings
> >

Access points

— Set up new or edit existing access points. Some or all access points may be preset for your device by your
•
service provider, and you may not be able to create, edit, or remove them.

Packet data

— Determine when packet data connections are used, and enter the access point if you use your device as a
•
modem for a computer.
Internet tel. settings — Define settings for net calls.
•
SIP settings — View or create session initiation protocol (SIP) profiles.
•
Data call — Set the time-out period after which data call connections automatically end.
•
VPN — Install and manage VPN policies, manage VPN policy servers, see the VPN log, and create and manage VPN access
•
points.
Configurations — View and delete trusted servers from which your device may receive configuration settings.
•
To obtain information about subscribing to a packet data service and the appropriate connection and configuration settings,
contact your network operator or service provider.
The settings available for editing may vary.
Access points
Select Menu Tools Settings
> >
An access point is where your device connects to the network by way of a data connection. To use e-mail and multimedia services
or to browse web pages, you must first define access points for these services.
An access point group is used for grouping and prioritizing access points. An application can use a group as a connection method
instead of a single access point. In that case, the best available access point inside a group is used for making the connection,
and in case of e-mail, also for roaming.
Some or all access points may be preset for your device by your service provider, and you may not be able to create, edit, or
remove them.
See "Internet access points," p. 51.
Packet data
Select Menu Tools Settings
> >
Your device supports packet data connections, such as GPRS in the GSM network. When you are using your device in the GSM
network, it is possible to have multiple data connections active at the same time; access points can share a data connection,
and data connections remain active (for example, during voice calls).

Packet data settings

The packet data settings affect all access points using a packet data connection.
Select from the following:
Packet data conn. — Select
•
in a supported network. Select
it.
Access point — Enter the access point name provided by your service provider to use the device as a packet data modem to
•
your computer.
Copyright © 2006 Nokia. All Rights Reserved.
to be notified of a new incoming call while you have a call in progress or
Yes to send a text message automatically to the person who is calling you informing why you
On to redial a number if it was busy at the first call attempt. Your device makes a maximum of 10
On to briefly display the approximate duration of the last call.
On to activate speed dialing on your device. To dial a phone number assigned to the speed dialing
On to answer an incoming call by briefly pressing any key, except the end key.
or Line 2 to change the phone line for outgoing calls and text messages (network service). This
to prevent line selection (network service). To change this setting, you need the PIN2 code.
Connection and from the following:
>
Connection Access
> >
Connection Packet
> >
When available to register the device to the packet data network when you switch the device on
When needed to establish a packet data connection only when an application or action requires
points.
data.
See "Connection manager," p. 56.
69
Check status to check