Flash And Video Light; After Capturing An Image - Nokia 5800 XpressMusic User Manual

To leave the camera open in the background and use other
applications, press the menu key. To return to the camera,
press and hold the capture key.

After capturing an image

After you capture an image, select from the following options
(available only if you have selected
Show captured image
Send — Send the image in a multimedia or e-mail
●
message, or through connection methods such as
Bluetooth connectivity.
To send the image to the person you are talking to, select
Send to caller during a call.
Delete — Delete the image.
●
— Open Gallery.
●
To use the image as wallpaper in the home screen, select
Options Use image
>
To set the image as a default call image to be used for every
call situation, select Options
image.
To assign the image to a contact,
Assign to contact.
To return to the viewfinder to capture a new image, press the
capture key.
© 2009 Nokia. All rights reserved.
Options Settings
>
> Yes):
Set as wallpaper.
>
Use image Set as call
> >
Options Use image
>

Flash and video light

Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The camera of your device has a dual LED flash for low light
conditions.
To select the desired flash mode, tap the current flash mode
>
indicator, which is one of the following:
Reduce red, On, and
Avoid touching the flash LEDs when the back cover has been
removed. The LEDs may get hot after prolonged usage.
Video light
To increase light levels when recording video in low light,
select
Scenes
A scene helps you to find the right colour and lighting settings
for the current environment. The settings of each scene have
been set according to a certain style or environment.
The default scene in image and video modes is
(indicated with ).
>
To change the scene, select
To make your own scene suitable for a certain environment,
select User defined
can adjust different lighting and colour settings. To copy the
settings of another scene, select
the desired scene. To save the changes and return to the
Automatic,
Off.
Scene modes
>
> Change. In the user defined scene you
Based on scene mode
Camera
Automatic
and a scene.
and
59