Advertisement
Before using the unit, ensure that its system program is at the most recent version.
For information on available upgrades for the system program, see the Roland website (https://proav.roland.com/).
You can check the system program version by Pressing the [MENU] button
Before using this unit, carefully read "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (the leaflet "USING THE UNIT SAFELY" and the Startup Guide
(p. 8)). After reading, keep the document(s) where it will be available for immediate reference.
Checking the included items
Check that all of the included items are present. If any of the
included items are missing, contact your dealer.
 V-80HD unit
 Startup Guide (this document)
 AC adaptor
 Leaflet "USING THE UNIT SAFELY"
 Power cord
PDF manual
(download from the Web)
Á Reference Manual
Contains more detailed explanations on operating this unit, a list
of menus and more.
Downloading
1.
Enter the following URL in your computer.
https://roland.cm/v-80hd_om
Ó
Ó
"System"
"Version".
Startup Guide
© 2024 Roland Corporation
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Roland V-80HD
Summary of Contents for Roland V-80HD
- Page 1 Enter the following URL in your computer. https://roland.cm/v-80hd_om Before using the unit, ensure that its system program is at the most recent version. For information on available upgrades for the system program, see the Roland website (https://proav.roland.com/). Ó Ó You can check the system program version by Pressing the [MENU] button “System”...
-
Page 2: Panel Descriptions
Panel descriptions Top panel AUDIO MIXER MEMO You can assign functions to the ASSIGNABLE PADS (8 pads × 8 [SETUP] button banks from A to H). Shows the setup screen in the display. Press the pads [1]–[8] while holding down the [SETUP] button to switch between Banks A–H. - Page 3 You can input audio from an audio device that uses Bluetooth, You can turn Camera Control Mode on/off by or use dedicated software on your computer or iPad to remotely using the ASSIGNABLE PADS, a footswitch (CTL) control the V-80HD. or control signal input (GPI). Video fader [PGM/A-CENTER] [PST/B-CENTER] knobs Manually switch between the videos being input to bus PGM/A and PST/B, and send them to the final output.
-
Page 4: Front Panel
Panel descriptions MONITOR [1]–[4] buttons Front panel Switches between video signals to monitor on the built-in display (monitor). Button Explanation MULTI-VIEW The final output video, preview output video and the MONITOR [1] videos allocated to the cross-point [1]–[8] buttons are shown in sections of the display. INPUT-VIEW 1 MONITOR [2] Shows the input videos or still images in 16 sections... -
Page 5: Rear Panel
HDMI IN 1–4 connectors, SDI IN 1–4 connectors You can connect this to a computer equipped with an RS-232 These connectors input video. Choose the connectors that are connector, and remotely control the V-80HD. appropriate for the connected devices. Connector... - Page 6 ¹ Outputs the audio and video to your computer. This is also used to input audio played on your computer to the V-80HD. ¹ Use the dedicated software to remotely control the V-80HD from a computer or iPad that is connected.
-
Page 7: Basic Operation
(one month or longer). If you want to use this unit properly record audio/video with the unit. over long periods of time, cycle the power periodically. Refer to the support page on the Roland website for the latest information on compatibility. Turning the power on https://roland.cm/v-80hd_om... -
Page 8: Using The Unit Safely
¹ Please be aware that in some countries or regions, broadcast, live performance, or other work), whether in whole or in part, and distribute, it might not be possible to use Roland Cloud at this sell, lease, perform or broadcast it without the time.
Need help?
Do you have a question about the V-80HD and is the answer not in the manual?
Questions and answers