Incoming Call Options - Nortel i2004 User Manual

To transfer with consult
1
Press the Trnsfr softkey.
2
Enter the address where you want to transfer this call, or press the quick
buttons to access and select an entry from the inbox, outbox or address book.
3 Press the Trnsfr softkey. The display prompts you to select whether or not
you want to consult with the called party.
4
Press the Yes softkey to consult with the party you are calling. The original
called party is put on hold. The call to the new address rings.
5 Consult with the party you wish to transfer the first call to. Press the Trnsfr
softkey to complete the transfer, or Cancel to disconnect and return to the
original call. The display confirms if the transfer is complete or fails.
6
Press the Ok softkey to return to an idle display, or if the transfer failed, press
the line key to reconnect the original call.

Incoming call options

The following softkey options are available for incoming ringing calls:
Press
Answer
Redrct
Decline
Ignore
Standard—Nortel Networks Confidential
To do this ..
Answer the call.
Redirect the call to another address.
Stop the call from ringing (does not
advance to the next ring list). The call is
cancelled and a message is sent to the
caller.
Note: Decline stops a call from ringing
on all devices defined in your ring list.
Stop the call from ringing on your i2004
Internet Telephone (call handling
depends on the feature settings). The
call is then handled by your ring list.
For more information about Ignore
feature settings see "Setting ignore
action" on page 35.
i2004 Internet Telephone User Guide
Chapter 4 Making calls 57