Installation Preparation; Zeu769 Combination Cutout - GE Monogram ZVB36 Installation Instructions Manual

CUTOUTS AND CLEARANCES
• Measure carefully when cutting the countertop.
Make sure sides of the opening are parallel and rear
and front cuts are exactly perpendicular to sides.
• Measure to be sure there is room for clearances to
the front edge of the countertop.
• Refer to cooktop installation instructions to be sure
that models fit into the base cabinets being used.
ZEU769 ELECTRIC COOKTOPS WITH 36" VENT
21-3/4"
Cutout
34" Cooktop and Vent Cutout
Depth
5/8" Cooktop Overlap
2-1/2" Min. Clearance to Cutout
Front Edge
of Countertop
Countertop Cutout: Requires 22-1/2" flat countertop surface
and 24-3/8" total countertop depth.

Installation Preparation

1-3/4" Min. Cooktop Cutout to Rear
Vertical Combustible Surface
36"
1/4" Overlap
22-1/2"
Total Flat
Surface
Required
2" Min. Cutout
to Side Walls
• Identify the cutout illustration for the cooktop model
you are installing.
• Draw lines on the countertop to follow as a cutting
guide. Measure and mark cooktop and vent overlaps
to be sure there is enough flat countertop depth.
2-1/2" to
Cutout
1/8" Gap
Cabinet: Requires 22-1/2" inside
cabinet depth. Remove rear
support rail.
6
1-7/8"
ZEU769
19-7/8"
3/4"
Vent
22-3/4" Inside
22" to Support Rail
24-3/4"
3/4"
Thick
Support
Rail