Product Dimensions; Installation Clearances; Installation Preparation - GE JVW5301 Installation Instructions Manual

PRODUCT DIMENSIONS

7-1/16"
30" to 36"
13"
3-5/16"
2"
4-1/4"
2

Installation Preparation

8-1/4"
17-3/8" Min.
24-7/16" Max.
13"
10-1/8"
18-1/2"
5"
1-3/8"

INSTALLATION CLEARANCES

These vent hoods are designed to be installed
onto a wall with no above cabinets.
• Install these hoods between the required 24"
minimum and 36" recommended maximum
above the cooking surface.
24" Required Min.
36" Recommended Max.
The vent hood must be installed between the
required 24" minimum and recommended 36"
maximum above the cooking surface. The hood
installation height above the cooking surface
depends upon ceiling height and duct cover
limitations. The telescopic duct cover conceals
the ductwork running from the top of the hood
to the ceiling. For supplied duct cover ceiling
heights, see table on page 5.
NOTE: Installation height should be measured
from the cooking surface to the lowest part
of the hood. This hood must be installed onto
a wall. It can be vented to the outdoors, or it
can be installed for recirculating operation. For
recirculation operation, see Recirculation Install
Planning.
31-10983