Installation Preparation - GE JVC3300 Owner's Manual And Installation Instructions

PRODUCT DIMENSIONS
2"
9-5/8"
3-1/4"
19-7/16"
20-1/2"
Liners (Optional)
4"
28-7/16" (JXL30)
34-7/16" (JXL36)
10

Installation Preparation

5-7/8"
10-3/16"
1"
19-9/16"
10-1/4"
17-1/4"
INSTALLATION CLEARANCES
This vent hood and liner assembly must be installed
24" required minimum and 36" recommended
maximum above the cooking surface.
• Always refer to the cooktop or range installation
instructions for product-specific clearances.
NOTE: Installation height should be measured from
the cooking surface to the bottom edge of the metal
hood liner or cabinet surface.
NOTE: UL requires any combustible surface to be a
minimum of 30" above the cooking surface.
• The custom cabinet internal height must be 16"
minimum.
• This hood can be vented to the outdoors, or it
can be installed for recirculating operation. For
recirculating operation, refer to Recirculating
Installation Planning.
• This hood may be mounted onto a cabinet or
installed over an island.
16" min.
11-1/4"
*24" Minimum required
*36" Maximum recommended
36" min.
49-80778