Installing The Processor Heat Sink And Fan; Matching The Fan-Heat Sink Clips With The Holes On The Processor - Acer Altos 9100 Series User Manual

2.5 Installing the Processor Heat Sink
and Fan
The Pentium II processor module comes with holes on one side to hold the clips of
the heat sink and fan. The upper set of holes (near the latches) on the processor are
wider and should match the wider ends of the clips on the heat sink. The lower set
of holes are smaller and should match the narrow ends of the heat sink clips.
Wide holes
Figure 2-5 Matching the Fan-Heat Sink Clips with the Holes on the Processor
AcerAltos 9100 Series User's Guide
2-8
Narrow holes
Wide clip ends