Installing The Processor Heat Sink - Acer 930 Manual

1.5

Installing the Processor Heat Sink

and Fan
The Pentium II processor module comes with holes on one side to hold the
clips of the heat sink and fan. The upper set of holes (near the latches) on
the processor are wider and should match the wider ends of the clips on the
heat sink. The lower set of holes are smaller and should match the narrow
ends of the heat sink clips.
Wide Holes
Narrow Holes
Figure 1-3 Matching the Fan-Heat Sink Clips with the Holes on the
Processor
1-10
Wide Clip Ends
User's Guide