Installing A Simm - Acer V55 System User Manual

Hide thumbs Also See for V55 System:
Table of Contents

Advertisement

1.5.2

Installing a SIMM

Follow these steps to install a SIMM:
1.
Carefully slip a SIMM at a 45° angle into a socket making sure that the
curved edge indicating the pin 1 of the SIMM matches pin 1 of the
socket.
A SIMM fits only in one direction. If you slip in a
SIMM but would not completely fit, you may have
inserted it the wrong way. Reverse the
orientation of the SIMM.
2.
Gently push the SIMM to a vertical position until the pegs of the socket
slip into the holes on the SIMM, and the holding clips lock the SIMM
into position. The SIMM should be at a 90 ° angle when installed.
Figure 1-5

Installing a SIMM

1-12
1
2
Pin 1 Indicator
(curved edge)
Peg
Hole
User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V55-1Entra 300Entra 500

Table of Contents