Acer Altos 9100 Series User Manual page 26

Table 1-3 System Error Messages (continued)
Message
Memory Error at:
MMMM:SSSS:OOO
(W:XXXX, R:YYYY)
where:
M: MB, S: Segment,
O: Offset, X/Y: write/read
pattern
Memory Size Mismatch
CPU Clock Mismatch
Onboard Serial Port 1
Conflict
Onboard Serial Port 2
Conflict
Onboard Parallel Port Conflict
Pointing Device Error
Pointing Device Interface
Error
Press F1 key to continue or
Ctrl-Alt-Esc for Setup
Real Time Clock Error
CPU BIOS Code Mismatch
Action
Check DIMMs on the CPU
board. Contact your dealer.
Run Setup. Check if the values
shown in the memory
parameters are correct. If
correct, exit Setup and reboot
the system. If the error
message reappears, seek
technical assistance.
Run Setup and disable the
port.
Run Setup and disable the
port.
Run Setup and disable the
port.
Check and connect pointing
device.
Replace the pointing device or
contact your dealer.
Press or
+ +
Setup.
Check the RTC chip. If it is still
good, run Setup. If not, replace
the RTC chip.
Contact your dealer.
to enter
Chapter 1 - System Board 1-13