KYMCO Sento 50 Owner's Manual page 22

(10) HORN/LIGHTS INSPECTION
Turn the ignition switch "
to check if it sounds.
Headlight/Taillight Inspection:
Turn on the headlight switch to check if the headlight and
taillight are good and check the light shells for dirt and
damage.
Stoplight Inspection:
Apply the front and rear brake levers respectively to check
if the stoplight is good. And also check the stoplight shell
for dirt and damage.
Turn Signal Light Inspection:
Operate the turn signal switch to make sure whether the
right/left front and rear turn signal lights can wink and
buzz. Also check the light shells for dirt and damage.
Headlight Turn signal light
Horn button
※ CAUTION:
Replace any dirty or damaged lights with new ones to
avoid danger during riding.
" and press the horn button
Taillight/ Stoplight
17