Error! Use the Home tab to apply
Home tab to apply
Installing the VGA Module/Cooler
Install the VGA Module/Cooler according to the following procedures and Figures
4-25, 4-26.
1. Seat the VGA Cooler on the back of the VGA module.
2. Secure them with four spring screws.
3. Turn to the other side of the module and seat the unit in the correct position on the system
board.
4. Secure the unit with screws
Qosmio F50 Maintenance Manual
2 to the text that you want to appear here. Error! Use the
2 to the text that you want to appear here.
4 Replacement Procedures
4-49