Toshiba Qosmio F50 Maintenance Manual page 232

4 Replacement Procedures Error! Use the Home tab to apply
appear here. Error! Use the Home tab to apply
4. Turn the LCD module over and place it face down on a protective surface, such as a foam
pad.
5. Remove the tape and LCD/FL cable connector. Then disconnect the LCD/FL cable.
NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of
the LCD module.
NOTE: Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances
or regulations.
NOTE: The LCD/FL cable must be carefully peeled away before disconnecting it from the
module.
Qosmio F50 Maintenance Manual
Figure 4-44 Removing the LCD module
2 to the text that you want to
2 to the text that you want to appear here.
4-68