4 Replacement Procedures Error! Use the Home tab to apply
appear here. Error! Use the Home tab to apply
4.14
VR board
Removing the VR board
Remove the VR board according to the following procedures and Figure 4-22.
1. Remove the two VR board with Special screws.
2. Disconnect the VR board flat cable.
Note: Be careful not to damage the VR board when installing them. Make sure they are in the
correct position.
Qosmio F50 Maintenance Manual
Figure 4-22 Removing the VR board
2 to the text that you want to
2 to the text that you want to appear here.
4-40