Installing The Display Assembly - Toshiba Qosmio F50 Maintenance Manual

Error! Use the Home tab to apply
Home tab to apply

Installing the Display Assembly

Install the display assembly according to the following procedures and Figures 4-14, 4-15.
1. Place the display panel in the correct position.
2. Connect the display cables to the system board.
3. Secure the display assembly with two M2.5x6 screws.
4. Close the display panel and turn the computer so the rear is facing you and secure tour
M2.5x4 screws.
Qosmio F50 Maintenance Manual
2 to the text that you want to appear here. Error! Use the
2 to the text that you want to appear here.
4 Replacement Procedures
4-33