4 Replacement Procedures Error! Use the Home tab to apply
appear here. Error! Use the Home tab to apply
Installing the VGA Board and Thermal Module
Install the VGA board and Thermal Module according to the following procedures.
1. Reapply Shinetsu 7762 grease on the thermal module as shown in Figure 4.26. If you use
one new thermal module, remove the release papers on the thermal pads first.
Thermal pad
Figure 4.26 Reapply Shinetsu 7726 grease on the thermal module and
NOTE: When thermal pad needs to be changed, please paste it in the location indicated in
Figure 4.26.
2. Seat the VGA board on the motherboard and secure it with two M2.5x5 screws.
3. Seat the thermal module in the correct position on the motherboard and secure it with six
spring screws according to the number sequence sealed on the thermal module.
Satellite L500D Maintenance Manual
2 to the text that you want to appear here.
Thermal pad
remove any release papers
2 to the text that you want to
Thermal Grease
4-42