General - Toshiba Qosmio F50 Maintenance Manual

Error! Use the Home tab to apply 2 to the text that you want to appear here. Error! Use the
4 Replacement Procedures
Home tab to apply 2 to the text that you want to appear here.
4.1

General

This chapter explains how to disassemble the computer and replace Field Replaceable Units
(FRUs). Some replacement procedures may not require you to remove all the surrounding FRUs
to replace only one FRU. The chart below shows the FRUs in the order in which they should be
removed in a top-down manner, irrespective of their physical locations. The FRUs shown in the
top area of the chart should normally be removed before removing the FRUs shown in the bottom
area. To replace the FRUs, first identify the suspect FRU for the system failure. Next, according
to this chart, determine the FRUs that need to be removed before removing the suspect FRU.
After you determine those FRUs, go to the appropriate sections according to the section numbers
shown in the boxes. Then start removal and replacement.
Qosmio F50 Maintenance Manual 4-1