Ir Blaster Board; Removing The Ir Blaster Board; Installing The Ir Blaster Board - Toshiba Qosmio F50 Maintenance Manual

4 Replacement Procedures Error! Use the Home tab to apply
appear here. Error! Use the Home tab to apply
4.18

IR Blaster Board

Removing the IR Blaster Board

Remove the IR Blaster Board according to the following procedures and Figure 4-28.
1. Disconnect the cable attaching the IR Blaster Board to the system board.
2. Remove two M2.5x6 screws.
3. Remove the IR Blaster Board.

Installing the IR Blaster Board

Install the IR Blaster Board according to the following procedures and Figure 4-28.
1. Seat the IR Blaster Board in the correct place on the computer's base.
2. Secure the board to the computer's base with two M2.5x6 screws.
3. Attach the cable to the system board.
Qosmio F50 Maintenance Manual
Figure 4-28 Removing the IR Blaster Board
2 to the text that you want to
2 to the text that you want to appear here.
4-50