Diagnostics; Entering The Sales Mode & Technician Mode; Technician Mode Navigation; Exiting The Technician Mode - Fisher & Paykel OB30DDEPX1 Service Manual

Service Manual 547226: OB30

4. Diagnostics

4.1 Entering the Sales Mode & Technician Mode
To Enter Sales Mode:
1. Ensure all oven modes and temperature displays are set to OFF.
2. Ensure no cooking auto functions are set.
3. Enter the User Select mode by pressing and holding the TIMER button and then the
CLOCK button. Hold for approximately 2 seconds.
4. Turn the oven mode dial counter clockwise one position.
5. Enter Sales Mode by pressing and holding the TIMER button and then the PROBE
button. Hold for approximately 5 seconds. "SALES SELECT" will be displayed in the
function display.
6. Turn the function knob clockwise until it displays "SHOW OFF"
7. Push the PUSH TO CLEAR button, the function, temperature and bezels will start to
flash.
8. Press the CLOCK button, the user interface will revert back to normal, but the sales
mode is activated. The product can select functions and temperatures settings, but the
elements are isolated and will not heat.
Note: To disable the sales mode, the oven will need to be switched off at the mains for at least
5 minutes to clear, and the product will revert back to normal operation and elements will
operate normally.

4.2 Technician Mode Navigation

To Enter Technician Mode:
1. Ensure all oven modes and temperature displays are set to OFF.
2. Ensure no cooking auto functions are set.
3. Enter the User Select mode by pressing and holding the TIMER button and then the
CLOCK button. Hold for approximately 2 seconds.
4. Turn the oven mode dial counter clockwise one position.
5. Press and hold the TIMER button and then the PROBE button, hold for approximately 5
seconds. 'SALES SELECT" will be displayed in the oven mode display.
6. Enter Technician Mode by pressing and holding the TIMER button and then the STOP
TIME button. Hold for 2 seconds, the Oven Mode Display will now show TECH SELECT.
Note: The clock display will show the version of software installed in the product.
The oven is now in Technician Mode. Oven diagnostics can be carried out.

4.3 Exiting the Technician Mode

To exit Technician Mode at any time press any button other than CLEAR or TIMER.
28
December 2012