Cuisinart CBK250U Instructions For Use Manual page 11

Pause
Once a program has started, it can be interrupted at any time by pressing the 'Pause' button (hold down for 2
seconds to activate). The outstanding time will flash on the display screen. To reactivate the program touch the
'Pause' button again and hold down for 2 seconds.
Colour
Press 'Colour' to select the desired crust colour. Choose from Light, Medium or Dark. The machine automatically
defaults to Medium.
Start/stop button
To start a program, touch the 'Start/Stop' button once and hold down for about 2 seconds. A short beep will
be heard and the two dots in the time display will begin to flash and the program will start. Any other button
apart from 'Start/Stop' and 'Pause' will be deactivated when a program is in operation.
To stop the program, touch 'Start/Stop' button for about 2 seconds, then a beep will be heard; this means the
program has been switched off.
Warning display
If the display shows 'H HH' after you have pressed 'Start/Stop' button, the temperature inside is too high. Stop
the program, open the lid and let the machine cool down for 10 to 20 minutes.
If the display shows 'E E0' or 'E E1' after you have pressed the 'Start/Stop' button, the temperature sensor has
malfunctioned; contact the Cuisinart Customer Care Line, (See 'UK After Sales Service' section for further
information).
11