Select Blower Option And Install Ductwork; Measure Installation - Rangemaster RM60000 SERIES Installation Instructions And User Manual

1. SELECT BLOWER OPTION
AND INSTALL DUCTWORK
Either an interior or exterior blower may be used with this hood.
The RM60000 Series hood must be installed with blower models
RM325H, RM326H, 331H, 332H, 335 or 336 only. Other blowers
cannot be substituted. (Blowers sold separately).
NOTES:1. The 331H, 332H, 335 or 336 exterior blower MUST
BE installed with the rough-in kit model 332KR (sold
separately).
2. In addition to the blower models listed above, this hood
is also compatible with older internal blower versions
325H and 326H. However, discard the installation
instructions included with those blowers and contact
our technical suppport to obtain replacement instruction.
Plan where and how the ductwork will be located.
Install proper-sized ductwork, transition(s), elbow(s), and roof or
wall cap for the type of blower you are using.
ROOF CAP
7" (178 mm)
ROUND DUCT
DECORATIVE
12"
FLUE
(305 mm)
or SOFFIT
HOOD
24" TO 30" (609 to 762 mm)
ABOVE COOKING SURFACE
HH0024A
MODEL RM325H SINGLE BLOWER
TYPICAL DUCTWORK
ABOVE COOKING SURFACE
HH0025A
EXTERIOR BLOWER
10" (254 mm)
ROUND DUCT
DECORATIVE
12"
FLUE
or SOFFIT (305 mm)
HOOD
24" TO 30" (609 to 762 mm)
ABOVE COOKING SURFACE
HH0026A
MODEL 331H, 332H, 335 OR 336 EXT.
BLOWER TYPICAL DUCTWORK
WALL CAP
7" (178 mm)
ROUND
ELBOW
ROOF CAP
10" (254 mm)
ROUND DUCT
WALL CAP
DECORATIVE 12"
FLUE
(305 mm)
or SOFFIT
4-1/2" x 18-1/2"
HOOD
(114 x 470 to
254 mm) ROUND
TRANSITION
(see page 4)
24" TO 30" (609 to 762 mm)
MODEL RM326H DUAL BLOWER
TYPICAL DUCTWORK
10" (254 mm)
ROUND ELBOW
EXTERIOR
BLOWER
332KR
ROUGH-IN KIT
(see page 4)

2. MEASURE INSTALLATION

Dimensions for the most common installations are shown
below.
Adjust your measurements for various heights of ceilings, soffits,
cabinets or cooktops. For proper operation, the hood must be a
minimum of 24" and a maximum of 30" above the cooktop.
to 10"
- 5 -
Standard
8 ft. (2.44 m)
ceiling
Standard 18" 18"
(457 mm) H (457 mm)
over-cooktop
19"
cabinet
(483 mm)
Top of wood
mounting strip
Hood
RMP Series
Backsplash
(optional)
24"
Minimum distance
(610 mm)
between the hood
and the cooktop
Standard 36"
(914 mm)
Cooktop
H cooktop
INSTALLATION WITH STANDARD 18'' HIGH
OVER-COOKTOP CABINET
Maximum distance
between the hood
and the cooktop
INSTALLATION WITH 12'' SOFFIT OR
OPTIONAL SOFFIT CHIMNEY RMN SERIES
HH0028A