Fitting The Adjustable Feet - CDA RC 9322 Manual For Installation, Use And Maintenance

Twin cavity gas cooker
Table of Contents

Advertisement

Fitting the Adjustable Feet

The adjustable feet must be fitted to the base of the cooker before use.
Rest the rear of the cooker an a piece of the polystyrene packaging exposing the base for the fitting of
the feet.
Fit the 4 legs by screwing them tight into the support base as shown in picture 36.
WARNING
When raising cooker to upright position always ensure two people carry out this manoeuvre to prevent
damage to the adjustable feet (fig. 37).
Fig. 36
Fig. 37
31

Advertisement

Table of Contents
loading

Table of Contents