Hitec 2.4Ghz System Set-Up; 2.4Ghz Module Features - HITEC Eclipse 7 Pro Instruction Manual

Hitec 2.4GHz System Set-up

2.4GHz Module Features

The following contains the complete instructions on how to use the Optima 2.4GHz series receivers and Eclipse 7 Pro set for a
trouble free 2.4GHz signal. We encourage you to review this information before using these products.
1. Dual Blue and Red Status indicator LED's
Indicates the set-up process codes and use status..
2. Function Button
Used for Linking(ID -Setting) the Eclipse 7 Pro to a receiver, entering the power down mode for range checks and the Nomal /
Scan Mode set-up.
3. Sensor Data Output and System Upgrade Connector Port
A 3 pin servo plug connector port is featured on back side of Eclipse 7 Pro . Using the HPP-22 PC interface accessory this
port serves to facilitate upgrading the devices software and downloading information from Optima 7,9 receiver if using
optional onboard sensor station..
2. Function Button
1. LED
3. Sensor Date Output &
System Update Port
3