Digisol DG-BR4015N User Manual page 46

150mbps wireless 3g broadband router
Table of Contents

Advertisement

Network Name (SSID)
Multiple SSID (1~7)
Broadcast Network
Name (SSID)
AP Isolation
MBSSID Isolation
BSSID
Frequency (Channel)
Operating Mode
Channel Bandwidth
Guard Interval
MCS(Modulation
Coding Scheme):
Reverse Direction Grant When enabled Reverse Direction Grant, the wireless
Aggregation MSDU
Auto Block ACK
Decline BA Request
When you are browsing for available wireless networks, this
is the name that will appear in the list (unless Visibility Status
is set to Hidden, see below). This name is also referred to as
the SSID.
To add additional wireless Network Names simply add the
name to the Multiple SSID field and click on apply at the
bottom of the page.
SSID broadcast can be disabled.
If enabled, will isolate communication between the clients
connected to router wirelessly.
If enabled, will isolate communication between the clients
from different SSID.
MAC Address of AP
Radio Channel that wireless AP/Router uses to communicate
with wireless clients.
HT Physical Mode description
Mixed mode: Provides backward compatibility with
IEEE 802.11n/g/b devices.
Green Field: Used for pure network of 802.11n access
point and clients, taking full advantage of high-
throughput capabilities of MIMO architecture.
20 MHz: Allows only single channel operation (20MHz).
20/40 MHz: Allows both single channel operations.
The guard interval is the period in nanoseconds that the
Gateway listens between packets.
The Modulation and Coding Scheme(MCS) is a value that
determines the modulation, coding and number of spatial
channels. ( Options: value [range] = 0~7 (1 Tx Stream), 8~15
(2 Tx Stream), 32 and auto (33). Default is auto.
AP/Router can reduce the transmitted data packet collision by
using the reverse direction protocol. The RDG improves
transmission performance and scalability in a wireless.
This option enables MAC Service Data Unit (MSDU)
aggregation. Default is disable.
Select to block ACK (Acknowledge Number) or not during
data transferring.
Select to reject peer BA-Request or not
46
DG-BR4015N User Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents