Digisol DG-BR4015N User Manual page 42

DHCP Type
Start IP Address
End IP Address
Subnet Mask
Primary DNS
Secondary DNS
Default Gateway
Lease Time
Spanning Tree
LLTD
UPnP
DNS Proxy
Recommended Value if you don't know what to fill:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
802.1d Spanning Tree: Disabled
DHCP Server: Enabled
When you finish with all settings, please click 'Apply' button to continue with other
setup procedures.
Assign IP address dynamically to the DHCP clients. Default is
Enabled.
Please input the Start IP address for this network.
Please input the End IP address for this network.
Please input subnet mask for this network.
Please input the primary DNS address for this network.
Please input the secondary DNS address for this network.
Please input default gateway for this network.
Enter the lease time for DHCP clients.
Enable 802.1d to start spanning tree function. Default is Disabled.
LLTD is used by to display a graphical representation of the local area
network (LAN) or wireless LAN (WLAN), to which the computer is
connected. Default is Disabled.
UPnP enabled clients are discovered dynamically. Default is Disabled.
Enable the DNS Proxy that will relay users'/clients' DNS requests to a
real DNS server IP address. Users no need to specify real DNS server
IP address. Default is Enabled.
DG-BR4015N User Manual
42