Brickcom PZ-040 12x Series User Manual page 42

e. HTTP Transport – If MJPEG is used for Video Codec, users can
enable HTTP Transport protocol for video communication.
NOTE – HTTP Transport is for non-IE browser used only.
Click Apply to apply settings or Cancel to cancel changes.
NOTE – For best recording experience, configure the Network
Camera to one of the following frame rates based on the Flicker-Free
setting:
Flicker-Free
Outdoor
Indoor (50/60 Hz)
B. Video Overlay
a. Timestamp - To display the date and time on the screen during live
view, check "Enable" to enable the timestamp function and select the
display position from the drop-down menu.
b. Text - To make a note about the camera, check "Enable" and select the
display position from the drop-down menu. Enter a video description
in the text box.
Click Apply to apply settings or Cancel to cancel changes.
NOTE - The video overlay will only takes effect in stream 1.
Frame Rate
25, 10, 7, 5, 3, 2
25, 20, 10, 7, 5, 3, 2
38