Table of Contents
Advertisement
P
562 U
'
M
I
UMP
SER
S
ANUAL
HDMI Auto-Negotiate
When enabled, the output resolution and refresh rate of the component and HDMI outputs are set per the DDC data received
from the TV.
HDMI Out
Displays current mode/resolution of the component and HDMI outputs.
Audio Setup
The Audio Setup menu allows the user to adjust various parameters of the audio outputs, including language, routing,
attenuation, and S/PDIF output format.
Audio Port
Allows selection of display of port 1 or port 2 parameters.
Audio Language
Allows selection of the audio language. Choices include ***, which is the first audio found, and a list of all audio descriptors
found in the transmission.
Audio Routing
Allows routing of program audio channels (Left and Right) to the output connectors for the port. Stereo will route left channel
audio to the white output connector and right channel audio to the red output connector. Or the user may select right on both
or left on both or reverse stereo (routing left channel audio to the red output connector and right channel audio to the white
output connector).
Audio Attenuation
Allows attenuation of the audio, 0 to 20 dB
S/PDIF Mode
Allows selection of PASSTHRU (no decoding will be done, the bitstream is passed), LPCM (Dolby Digital and AAC will be
decoded), or OFF (no output).
16
800092-02 Rev. C
www.wegener.com
Advertisement
Table of Contents
