Failure Codes And Troubleshooting - CDA wc431 Manual For Installation, Use And Maintenance

Failure Codes and Troubleshooting

The programme indicators also serve as a diagnostic display to
help in the event of a problem with the appliance.
Error Code Error Description
Alarm is active against
F1
Waste water in the
F2 machine cannot be
F3 Continual fill error
Inadequate water
F5
F6 Faulty heater sensor
Overheating error
F7 (temperature in the
machine is too high
F8
Spray diverter position
F9
FE Faulty electronic card
water flow
discharged
supply
Heater error
error
21
Advice
Turn off dishwasher and disconnect water
supply
Contact CDA Customer Care
Drain hose is blocked
The filters in the machine may be blocked
Restart the dishwasher and cancel the
programme
If the error continues contact CDA Customer
Care
Contact CDA Customer Care
Make sure the water tap is fully open
Close the water tap, separate the water inlet
hose from the tap and clean the filter
Restart the dishwasher
If the error continues contact CDA Customer
Care
Contact CDA Customer Care
Contact CDA Customer Care
Contact CDA Customer Care
Contact CDA Customer Care
Contact CDA Customer Care