Failure Codes And Troubleshooting; Error Description - CDA WC461 Manual For Installation, Use And Maintenance

Failure Codes and Troubleshooting

The programme indicators also serve as a diagnostic display to help in the event of a problem with the appliance.
Error Code
F1 Alarm is active against water overflow
F2
F3
F5
F6
Overheating error (temperature in the
F7
F8
F9
FE
14

Error description

The waste water in the machine
cannot be discharged.
Continual fill error.
Inadequate water supply.
Faulty heater sensor.
machine is too high).
Heater error.
Spray diverter position error.
Faulty electronic card.
• Turn off the dishwasher and disconnect the water supply
• Contact CDA Customer Care
• Drain hose is blocked
• The filters of your machine might be blocked
• Restart the dishwasher and cancel the programme
• If the error continues, contact CDA Customer Care
• Contact CDA Customer Care
• Make sure the water tap is fully open
• Close the water tap, separate the water inlet hose from the tap
and clean the filter.
• Restart the dishwasher.
• If the error continues, contact CDA Customer Care
• Contact CDA Customer Care
• Contact CDA Customer Care
• Contact CDA Customer Care
• Contact CDA Customer Care
• Contact CDA Customer Care
Advice