Failure Codes And Troubleshooting - CDA WC140 Manual For Installation, Use And Maintenance

Failure Codes and Troubleshooting

Your dishwasher control panel is equipped with a diagnostic display to help in the event of a problem with the appliance.
Intensive Normal
Error Code
Eco Quick
Error description
Prewash
Inadequate water
supply
Continual fill error
The waste water in
the machine cannot
be discharged.
Heater error
Alarm is active against
water overflow
Faulty electronic card
Overheating error
(temperature in the
machine is too high)
Faulty heater sensor
Advice
Make sure the water inlet tap is
fully open
Close the water tap, separate the
water inlet hose from the tap and
clean the filter
Restart your machine, contact
CDA service if the error resumes
Close the tap and contact
CDA service
Drain hose is blocked
The filters of your machine
might be blocked
Restart the dishwasher and
cancel the programme
If the error continues, contact
CDA service
Contact CDA service
Turn off the dishwasher and
disconnect the water supply
Contact CDA service
Contact CDA service
Contact CDA service
Contact CDA service