System Armed And Activated; Disarming The System; Activation Alert - Crime Guard 328i3 Operation Manual

SYSTEM ARMED & ACTIVATED
While the system is in the Armed state:
• The Status Indicator Light will be flashing slowly to confirm that the
system is armed, and also serve as a visual deterrent.
• The starter interrupt circuit is engaged.
• Protected zones are being monitored for intrusion attempts.
Should an activation into the alarm condition occur:
• The electronic siren will loudly sound.
• The parking lights will flash.
• The doors will lock,* regardless of their locked or unlocked status. This
feature is unique- if the system detects that a door is opened, it waits until
the door is closed before relocking it, denying the thief reentry.
An activated alarm condition has a duration of 30 seconds (60 is optional)
unless the system is disarmed using the transmitter or the Easy Valet
switch. If all protected zones are secure at the end of the alarm condition, the
system will stop and rearm automatically, ready to detect another entry
attempt. If a protected zone is still violated at the end of the alarm condition,
the system will reactivate for up to two additional alarm cycles. After the
third alarm cycle the system will automatically rearm and bypass the open
zone until that zone returns to a normal "non-violated" state.
• Once the system resets after it has been activated, upon disarming the
audible and visual confirmation will change to indicate the activation.
This is the "Activation Alert", which is explained on page 10.
* An optional doorlock interface must be installed
There are three methods of Disarming the security system:
1- The first method is to press and release the transmitter's Large Upper
Button to disarm the system. This is the normal "daily use" method.
2- The second method is to press and release twice within 5 seconds the
transmitter's Small Middle Button. This is "silent Disarming".
3- The third method is for emergencies, should the transmitter become lost
or inoperable. This is the "Emergency Override", and uses the ignition
key and Valet Switch.

DISARMING THE SYSTEM

Page 8
TM