Table of Contents
Advertisement
Easy Valet Mode: This allows you to turn off all off the "alarm" operations
of the security system while retaining the remote convenience features such
as keyless entry, Panic, and the Auxiliary Outputs. The system may only be
placed into Easy Valet when it's disarmed; if armed, an Emergency Override
must be performed before placing into Easy Valet Mode. Once the system
is in Easy Valet Mode, it cannot become armed from
the transmitter, Last Door Arming, or Automatic Rearming.
Although both use the Valet Switch, Easy Valet Mode and Emergency
Override are two similar, but different procedures. Emergency Override
disarms an armed and activated system, and requires the ignition key. Easy
Valet Mode turns off the alarm operations of the disarmed system, but
without the need of the ignition key.
Easy Valet mode is designed for situations in which it is not convenient
for the security portion of the system to be operational. For example: During
extended stopovers for vehicle servicing, maintenance, valet parking, wash-
ing, etc.
WITH THE SYSTEM
DISARMED, PRESS
AND HOLD THE
VALET SWITCH
FOR 2 SECONDS
To Enter "Easy Valet" Mode:
With the system disarmed, Press & Hold the Valet Switch for 2 seconds.
- The siren will chirp twice, the parking lights will flash twice and the
Status Indicator Light will illuminate solid Red to confirm that the
system is in Easy Valet mode.
- To remind the user that the system in Easy Valet mode, the siren will
chirp once every time the vehicle's ignition is turned off.
To Exit "Easy Valet" Mode:
Press & Release the Valet Switch.
-The Status Indicator Light will turn off to confirm exit from Easy Valet mode.
EASY VALET MODE
Page 14
The Valet Switch is in the Status
Indicator Light/Valet Switch As-
sembly. The installer has the
option of utilizing an additional,
separate Valet Switch should
mounting in a hidden location
be desired. Please become fa-
miliar with the location of the
Easy Valet switch.
Advertisement
Table of Contents
