Table of Contents
Advertisement
Activated" Vehicle Recovery is one three methods of activating this feature,
which is explained on page 18.
Programming Door Activated Vehicle Recovery:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released thirteen times. The system's response will be thirteen siren
chirps, and the Status Light flashing thirteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter's Large Upper Button
to turn on the Door Activated Vehicle Recovery feature (the siren will chirp
once) or the Small Lower Button to turn this feature off (the siren will chirp
twice).
Feature #14
This form of the Vehicle Recovery feature gives you the option of
activating the Vehicle Recovery operation from the transmitter in the event
that you are forced from your car. "Transmitter Activated" Vehicle Recov-
ery is one three methods of activating this feature, which is explained on page
18.
Programming Transmitter Activated Anti Car-Jacking:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released fourteen times. The system's response will be fourteen siren
chirps, and the Status Light flashing fourteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter's Large Upper Button
to turn on the Transmitter Activated Vehicle Recovery feature (the siren will
chirp once) or the Small Lower Button to turn this feature off (the siren will
chirp twice).
Feature #15
This feature prevents your system from being disarmed accidentally,
configuring the system to automatically rearm itself 90 seconds after it has
been Disarmed by the transmitter. The operation of the Automatic Rearming
feature is explained in more detail on pages 10-11.
Transmitter Activated Vehicle Recovery
Page 28
(Factory Default Setting Off)
Automatic Rearming
(Factory Default Setting On)
Advertisement
Table of Contents
