Vehicle Recovery - Crime Guard 328i3 Operation Manual

Keyless entry and security
Hide thumbs Also See for 328i3:
Table of Contents

Advertisement

Your system is equipped with three separately programmable Vehicle
Recovery protection features, which also provide Anti-Carjacking protection.
The Vehicle Recovery operation may be selectively activated by the ignition,
by an open door, or by the transmitter.
How It Works
Once the Vehicle Recovery process has begun, the user has 53 seconds
to cancel the process by entering
the Valet Switch. If Vehicle Recovery is not cancelled, 53 seconds after
being activated the siren will begin to chirp for 7 seconds to alert the user that
the system is about to enter into an alarm condition.
If the Vehicle Recovery process is not cancelled before the 60 second
countdown expires, the system will enter an alarm condition, sounding the
siren and flashing the parking lights. 30 seconds after this occurs, or should
the ignition be turned off in the meantime, the stater interrupt will engage.
Once the system enters the alarm condition, it will not respond to the
transmitter, nor will the system reset automatically after 60 seconds.
Once in the alarm condition, the Vehicle Recovery Protection can only be
disengaged by:
Step 1: Turning the vehicle's ignition off.
Step 2: Turning the ignition back on.
Step 3: Within 5 seconds, perform an Emergency Override using the
Valet Switch. If the SecureCode has been customized, the correct
number of Valet Switch presses must be made.
Level #1: Vehicle Recovery activated by the vehicle's ignition:
The Vehicle Recovery process is started every time the vehicle's ignition is
turned on. This is programmable feature #12.
Level #2: Vehicle Recovery activated an open door:
The Vehicle Recovery process is started by a door of the vehicle being
opened, but only if the ignition is on when the door is opened. This is
programmable feature #13.
Level #3: Vehicle Recovery activated using a remote control:
The Vehicle Recovery process is started by pressing holding the transmitter's
Small Lower Button for 3 seconds, but only if the vehicle's ignition is on.
This is programmable feature #14.

VEHICLE RECOVERY

the system's
Page 18
programmed SecureCode
using

Advertisement

Table of Contents
loading

Table of Contents