Table of Contents
Advertisement
Feature #18
This feature configures the system to automatically lock the vehicle's
doors every time that the ignition switch is turned on. An exception to this
would be if feature #21 is turned on, and a door being open when the ignition
switch is turned on. The two following features, #19 and #20, control the
automatic unlocking operation.
Programming Doors Lock When Ignition Is Turned On:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released eighteen times. The system's response will be eighteen siren
chirps, and the Status Light flashing eighteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter's Large Upper Button
to turn on "Doors Lock When Ignition Turned On" (the siren will chirp once)
or the Small Lower Button to turn this feature off (the siren will chirp twice).
Feature #19
This feature configures the system to automatically unlock the vehicle's
doors every time that the ignition switch is turned off. An exception to this
would be if feature #21 is turned on, and a door being open when the ignition
switch is turned off.
Programming Doors Unlock When Ignition Is Turned Off:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released nineteen times. The system's response will be nineteen siren
chirps, and the Status Light flashing nineteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter's Large Upper Button
to turn on "Doors Unlock When Ignition Is Turned Off" (the siren will chirp
once) or the Small Lower Button to turn this feature off (the siren will chirp
twice).
Feature #20
Doors Lock When Ignition Is Turned On
Doors Unlock When Ignition Is Turned Off
Page 30
(Factory Default Setting On)
(Factory Default Setting On)
Is Not Used On The 328i
3
Advertisement
Table of Contents
