Table of Contents
Advertisement
ABOUT YOUR NEW CRIME GUARD SYSTEM
Congratulations on your purchase of a new Crime Guard security system.
Crime Guard systems combine the benefits of easy-to-use convenience with
"no nonsense" protection of person and property. Please review this guide
to become familiar with your Crime Guard vehicle security system. To
operate your security system, the three principal components are first
described: the Remote Control Transmitter, the Red Status Indicator Light,
and the Easy Valet
The Remote Control Transmitter: Your system comes with two pre-
learned remote controls, or "transmitters", and is capable of being operated
by as many as four transmitters. The transmitter has three buttons: A Large
Upper button, a Small Middle Button, and a Small Lower Button.
Every transmitter has its own unique, invisible electronic "code". Each
time the transmitter is used, this code randomly changes, effectively protecting
your system against "code grabber" devices, like those used to copy cellular
phone security codes. Another exclusive patented feature, Automatic
Transmitter Verification (ATV
operate your system, and is explained on page 19. These features, and many
others, ensure that Crime Guard systems are the most secure vehicle security
systems available.
The Status Indicator Light: The Red Status Indicator Light reports the
status of the security system at all times, and also serves as a visual deterrent
to break-ins and theft. In addition, the Status Indicator Light is part of the
TM
ATV
visual display, and is also used for the Alarm Memory Recall feature.
Specific description of the Status Indicator Light is on page 15.
The Valet Switch: The Valet Switch has three main functions:
1- The Valet Switch can be used to turn off the security operation of the
system, including the Last Door Arming feature (if used). This is
referred to as "placing the system into Valet Mode".
2- The Valet Switch can also be used, in conjunction with the vehicle's
ignition key, to perform an emergency disarming of the security system
in the event the transmitter is lost or becomes inoperable. This is
referred to as an "Emergency Override".
3- The Valet Switch is used in the procedure of programming operational
features and also for encoding transmitters to the system.
TM
Switch.
TM
Page 4
), ensures that only your transmitters
Advertisement
Table of Contents
