Table of Contents
Advertisement
THE 328i
Feature #1
The first level in the programmable features menu is Transmitter Pro-
gramming Mode, by which additional or replacement transmitters can be
programmed to operate the system. It is important to note that when a
transmitter is programmed into the system, the ATV Warning is activated
and all previous transmitter codes in the system's memory are deleted.
If a third or fourth transmitter is to be added to operate the system, all of
the transmitters must be programmed into system's memory at the same time,
as the first new transmitter code entered will erase the existing transmitter
codes. Therefore, if your system should ever be compromised by the
addition of an unauthorized transmitter, the ATV feature will warn you. By
simply reprogramming all of your transmitters into the system, the
unauthorized transmitter will be erased.
To program a transmitter:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released one time only. The system's response will be one siren chirp,
and the Status Light flashing one time, pausing, then repeating. Within 10
seconds, press and release the Large Upper Button of the first transmitter.
The system confirms "learning" the transmitter's code chirping the siren
once. Repeat this action with each transmitter to be programmed. Only the
Large Upper Button of the transmitter needs pressing and release; all of the
other transmitter button's operations will be learned automatically.
To program a transmitter to a "2nd" or "3rd" system:
Up to three Crime Guard systems may be independently operated using
a single transmitter. To accomplish this, the transmitter's button functions
are different for each of the vehicles. This prevents Arming or Disarming the
multiple systems simultaneously when all are within range of the transmitter.
To program a transmitter for 2nd or 3rd systems, when programming press
and release either of the small buttons instead of the Large Upper Button. The
system will automatically assign the transmitter's other functions in a
different order. The following chart shows button function assignment.
Only the "Arm/Disarm" button is pressed when programming.
3
's PROGRAMMABLE FEATURES
Transmitter Programming Mode
Arm/Disarm
Large Button
Small Button
Small Button
Auxiliary Output
Small Button
Large Button
Large Button
Page 22
Advertisement
Table of Contents
