Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Crime Guard Crime Guard 533i4
Summary of Contents for Crime Guard Crime Guard 533i4
- Page 1 BACK COVER PRINTER’S NOTE: production back cover OPERATION MANUAL is to be printed with different color artwork; this is a “place marker” 533i cover. FRONT COVER PRINTER’S NOTE: production front cover is to be printed with different color artwork; this is a “place marker”...
-
Page 2: Table Of Contents
A- During this time Chirp or Mute can be chosen by pressing 1) Press and TABLE OF CONTENTS the “:” button for 1 second. hold the “P” button B- Hold this button for 5 seconds to enter programming mode. About Your New Crime Guard System ......... 3-4 The Remote Transmitter, Status Light &... -
Page 3: About Your New Crime Guard System
• The various lines at the upper rear of the vehicle graphic represent a unique tween the two large buttons, which illuminates Omega feature which allows the user to customize the vehicle type represented whenever a button is pressed and thus a signal is by the display. -
Page 4: Using Your Crime Guard System
The Valet Switch has three main functions: The Echo has the same four operational buttons as the standard transmitter- the “Lock/Arm”, the “Unlock/Disarm”, the “ ” Auxiliary Channel #2 button, and a “ ” 1- The Valet Switch can be used to turn off the security operation of the button for Auxiliary Channel #3;... -
Page 5: Remote Arming By Transmitter
An exiting upgrade option to your Crime Guard system is a 2-way remote tem to still arm and protect the other normal, non-violated zones. In the “transceiver” controller, the Omega Echo. The remote transceiver, in addition to case of a bypassed zone or circuit, should the violated condition return to... -
Page 6: Last Door Arming By Exiting The Car
If the hood and trunk zone, or sensor circuit is bypassed when the sys- Upper Left "Lock" Button = Upper Right "Unlock" Button = lowest chirp volume (8mS); medium low chirp volume (12mS); tem is armed, instead of the normal arming confirmation the siren will chirp system responds with 1 chirp system responds with 2 chirps four times and the parking lights will flash four times to alert you. -
Page 7: System Armed And Activated
Feature #15 Door Activated Vehicle Recovery again at the beginning. (Factory Default Setting Off) • Last Door Arming is separate from, and does not effect the operation of This form of Vehicle Recovery is initiated by a door being opened. The Vehicle arming by using the transmitter. -
Page 8: Disarming The System
alarm cycles. After the third alarm cycle the system will automatically rearm Feature #10 Unlock #2 When Ignition Is Turned Off and bypass the open zone until that zone returns to a non-violated state. (Factory Default Setting Off) • Once the system resets after it has been activated, upon disarming the Explained in the previous feature, if Driver’s Door Priority is installed this feature audible and visual confirmation will change to indicate the activation. - Page 9 Safety Disarm Feature case the system should also disarm. This feature configures the system to disarm when Auxiliary Channel #2 is used, or to not disarm. When programming this Pressing and releasing the Upper Right Unlock Button while the system is feature, pressing the transmitter’s Upper Left “Lock”...
-
Page 10: Disarming By Emergency Override
to chirp the total number entered Valet switch entry. second period, if no protected entry points are opened and the vehicle’s Important: Now let the system exit Programming Mode by allowing the 10 ignition is NOT turned on, the system will automatically arm itself at the end second time limit to expire without any further programming activity. -
Page 11: Enhanced Remote Panic
PROGRAMMABLE FEATURES ENTER THE VEHICLE AND USE YOUR KEY TO WITHIN 5 TURN THE IGNITION ON SECONDS OF This section explains each of the programmable features in detail, notes the TURNING THE IGNITION ON, factory default setting, and includes programming information as needed.. ENTER THE SECURECODE BY PRESSING THE... -
Page 12: Other Transmitter Operations
• Repeat this Step 6 for each additional feature until all features The Remote Panic feature is designed for situations in which the user feels are programmed. threatened and/or in need of attracting attention. • Remote Panic allows you to activate the siren and flashing lights from Step 7 Turn the vehicles’s ignition on or allow 10 seconds to pass without the transmitter, with the enhanced choice of having the doors lock, or performing any programming actions. - Page 13 features. Once the system is in Programming Mode, a 10 second period • Silent arming and disarming from the transmitter is for the temporary without programming activity will cause the system to automatically exit suspension only of the confirmation chirps- i.e. for that particular arming Programming Mode.
-
Page 14: Valet Mode
These can be any combination of standard Crime Guard keyless entry, the Auxiliary channels, and the safety feature of Remote transmitter or, if your system is upgraded, the optional Omega Echo 2-way Panic. The system may only be placed into Valet Mode when it’s disarmed;... -
Page 15: Status Light
Level #2: Vehicle Recovery activated an open door: STATUS LIGHT The Vehicle Recovery process is started by a door of the vehicle being opened, but only if the ignition is on when the door is opened. This is The Status Light visually indicates the operational condition of the system, programmable feature #15. - Page 16 IMPACT SENSOR While operating on the backup battery, the system will not flash the parking lights, nor the Status Light. The siren will continue to operate, all Your Crime Guard security system includes an accessory sensor which protected entry zones will continue to be monitored, and the Starter Interrupt detects impact to the vehicle, which greatly increases the seurity system’s will operate while the system is armed.