Table of Contents
Advertisement
and the Status Light flashing eight times, pausing, then repeating. Within 10
seconds, press and release the transmitter's Large Upper Button to turn on
the Doors Lock With Last Door Arming feature (the siren will chirp once)
or the Small Lower Button to turn off the feature (the siren will chirp twice).
Feature #9
This feature configures the system to illuminate the vehicle's parking
lights for 30 seconds when it is Disarmed. Otherwise, if this feature is turned
off, the parking lights will flash once upon Disarming the system.
Programming Parking Light Illumination Upon Disarm:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released nine times. The system's response will be nine siren chirps, and
the Status Light flashing nine times, pausing, then repeating. Within 10
seconds, press and release the transmitter's Large Upper Button to have the
parking lights turn on for 30 seconds when the system is Disarmed (the siren
will chirp once) or the Small Lower Button to have the parking lights only
flash once when the system is Disarmed (the siren will chirp twice).
Feature #10
This feature configures the system to engage the starter interrupt
when the remote transmitter is used to lock the vehicle's doors while the
system is in Valet Mode. When this is done, the transmitter must be used to
unlock the doors or an Emergency Override must be performed to disengage
the starter interrupt.
Programming Starter Interrupt Operates In Valet Mode:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released ten times. The system's response will be ten siren chirps, and
the Status Light flashing ten times, pausing, then repeating. Within 10
seconds, press and release the transmitter's Large Upper Button to turn this
feature on (the siren will chirp once) or the Small Lower Button to turn this
feature off (the siren will chirp twice).
Parking Light Illumination Upon Disarm
Starter Interrupt Operates In Valet Mode
(Factory Default Setting Off)
Page 26
(Factory Default Setting Off)
circuit
Advertisement
Table of Contents
