Yardworks YW1100PP Instruction Manual page 16

Operation Function
3. Time Mode
Preset the timer for the
pump to turn on and off
at certain times - outside
those times it will be on
automatic.
OPERATION (cont.)
LCD Control Panel
a)
b) Setting the current time
c) Setting the timer
d)
e)
f)
Programming
Depress the 'MODE' button twice and this screen
will appear.
Press the 'SET' button, enter time by pressing SET (+)
to increase the number and MODE (-) to decrease. Then
press CHECK to save the time.
i. To set the 'timer on' time
Press the 'SET' button, enter 'ON' time by pressing SET
(+) to increase the number and MODE (-) to decrease.
Then press CHECK to save the time.
ii. To set the 'timer off' time
Press the 'SET' button, enter 'Off' time by pressing SET
(+) to increase number and MODE (-) to decrease. Then
press CHECK to save the time.
This screen appears after the timer has been set for
around 5 to 10 seconds.
This screen appears after the screen above goes off. It
shows the time left till the pump turns on next. Then it
will show a count down for the time left till the pump
turns off.
15