Setup - Recording Mode - Nadatel SDVR-9000C User Manual

Item
OSD
SEQUENCE
SEQ-DWELL TIME
OSD CONTRAST
CHANNEL
DISPLAY
BRIGHTNESS
CONTRAST
HUE
SATURATION
3-3. Setup – Recording Mode
To set values for recording video, use the UP and DOWN controls to navigate through the menu
items. Change the value of the menu item using the LEFT and RIGHT controls.
Table 3.2.1. Menu items in DISPLAY mode setup
Enable/disable on-screen-display.
Enable/disable sequential display of video in Full Screen mode.
Set the dwell time for each, 4 or 9 channels display in sequential
display mode.
Set the visibility level of the On Screen Display (OSD).
Select the channel for applying the following settings.
Presses SELECT to change channel name.
Enable/disable display of the video channel in live display mode
Change the brightness value for the specified channel.
Change the contrast value for the specified channel.
Change the hue value for the specified channel.
Change the saturation value for the specified channel.
Figure 3.3.1. Recording mode setup screen
Description
23