Setup - Recording Mode - Nadatel UH-0413L User Manual

SEQUENCE-
DWELL TIME
CHANNEL
NAME
COVERT
MAIN OUTPUT
RESOLUTION
MAIN MONITOR
OUTPUT
SPOT MONITOR
OUTPUT
3-3. Setup – Recording Mode
In the SETUP menu, select the RECORD tab. Then, the RECORD menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control.
Menu item
CHANNEL
Set the dwell time of each, single channel display in sequential display
mode (3~60seconds)
Select a channel to apply the name and covert settings change using
the mouse or the remote control.
Select a channel to apply the following settings using the mouse
Set the channel name. Press the right square button and set the
channel name and select OK using the mouse.
The name can be made up to 10 characters.
Enable/disable display of the specified video channel in live display
mode.
Select 1280x720 or 1920x1080.
Set the proper main monitor output among HDMI&VGA, HDMI or VGA.
The default value is HDMI&VGA simultaneous output.
Spot monitor output is decided by selecting the main monitor output.
Figure 3.3.1. Recording mode setup screen
Table 3.3.1. Menu items in Recording mode setup
Select a channel for applying the following settings using the mouse or
Description
21