Setup - System Mode - Nadatel SDVR-9000C User Manual

OVERWRITE
DISK FORMAT
DISK INFO
RECORDING LIMIT
RECORDING LIMIT DAYS
3-6. Setup – System Mode
Use the System Setup screen to input system parameters.
Use the UP and DOWN arrow controls to navigate through the menu items and use the LEFT
and RIGHT arrow controls to change the value of the menu items.
When enabled, the DVR will continue recording and
overwrite the oldest existing recorded data once the hard
drive is full. When disabled, recording will stop once the hard
drive is full.
Format the hard drive. Use the UP and DOWN arrow buttons
to select ON, then press SEL. You then have the option to
YES or NO.
Caution
All recorder data will be lost. We recommend that you
archive any data that you may need in the future before you
format the hard drive.
Hard drive information
Enable/disable recording limit.
Set the limit days for recording to the hard disk drive from 1
to 60 days.
Figure 3.6.1. SYSTEM Setup Screen
Table 3.6.1. Menu items in SYSTEM Setup screen
31