2. Name, Function and Connection
2-1. Front Panel
The following information will help you to operate the front panel controls.
NO.
Name
A
HDD
B
RECORD
C
ALARM
D
NETWORK Indicating that when Network client connects through the network.
E
BACKUP
NO
Name
1
POWER
2
NUMBER
3
SEQ
4
PTZ
5
SETUP
6
BACKUP
7
REW
8
AUDIO
Figure 2.1.1. Front panel
Table2.1.1. Indication lamps
Indicating that the system is accessing the hard disk.
Indicating that the system is recording video data.
Indicating that when sensor(s) is/are triggered or motion is detected.
Indicating that USB or CDRW storage device is stored images or video.
Table 2.1.2. Front panel buttons
POWER ON/ OFF
Channel keys. For channel 10, press the 0 key. For channel 11, press
the +10 and 1 key. For channel 16, press the +10 and 6 key.
Enable/disable the automatic sequence of display of channels in full
screen, quad, 9-split display mode.
Press to control Pan/Tilt/Zoom operations.
Press to enter SETUP menu.
Press to capture video in jpeg format in live or playback mode.
Press to rewind the footage in playback mode.
Press to select audio mode such as SINGLE, MIX and MUTE.
MUTE- All of 4 channels.
Description
Description
16