Setting Up The Dvr; Setup - Main Screen - Nadatel SDVR-9000C User Manual

3. Setting up the DVR

The following sections detail the initial setup of the DVR
3-1. Setup – Main Screen
When the SETUP button is pressed, the DVR will ask for a password. The default password is
1111, which can be entered by pressing the up button 4 times and then pressing the SEL button.
It is recommended that a new password be assigned to protect the system. The procedure for
assigning a password is found in section 3.7. After a password has been assigned, enter the
password by using the direction keys (representing 1, 2, 3, & 4) and press the SEL button for
the password validation. Once the password is entered the Setup screen as shown in Figure
20