Table of Contents
Advertisement
• During conversation, press "
• When there is incoming call, press "
• Press "
" button to reject incoming call.
Audio Streaming
1. If your phone is "A2DP" format is compatible, you can play music in your mobile and the music will be transferred to
car audio unit.
2. Make sure your mobile and the car radio unit is paired and connected.
3. Play the music in your mobile according to your mobile operating method.
4. Unit will display "A2DP" when receiving A2DP music automatically, but for some mobile your have to press LD/MOD
button to change A2DP mode.
5. You can press
or
RESET
Reset button is placed on the housing.
The reset button is to be activated for the following reason:
•
Initial installation of the unit when all wiring is completed.
•
All the function button do not operate.
•
Error symbol on the display.
TECHNICAL SPECIFICATIONS
MP3/WMA PLAYER SECTION
Signal to Noise Ratio
Channel Separation
Frequency Response
TUNER (FM)
Frequency Range
Channel Step
Intermediate Frequency
Sensitivity
Stereo Separation
Signal to Noise Ratio
LINE-OUT
Output
Impedance
GENERAL
Power Supply
Speaker Impedance
Output Power
Fuse
Note: Specifications and the design are subject to possible modification without notice due to improvement.
" button to end call.
" button to receive call.
on head unit for previous or next tracks.
> 60 dB
> 50 dB (1kHz)
0Hz - 0 kHz
87.5-108 MHz
50 kHz
10.7 MHz
.8 µV
30 dB
> 50 dB
1.5V (max.)
10k Ohm
1V DC (10.8-15.6V allowable)
4 or 8 ohm
75W x 4CH
10A
EN-8
RESET
Advertisement
Table of Contents
