Specifications - Caliber RMD 056DAB-BT Manual

RMD
REMOTE CONTROL
1. Power Button
Short press to turn on the unit.
2. Answer phone
On Bluetooth mode, press it to answer the phone
or redial.
3. End call
When it is on Bluetooth phone call, press it to hang
up.
4. 0 / Mode
When the unit is on, press it for MODE switch.
5. 1 / 12
When it is on radio mode, short press it to choose
station1. Long press it to define station number to
be "1"; When it is on USB/SD playing, Bluetooth
music mode, short press it for pause/playing
6. 2 / INT
When it is on radio mode, short press it to choose
station2. Long press it to define station number to
be "2"; When it is on USB/SD playing, short press it
for browse playing.
7. 3 / RPT
When it is on radio mode, short press it to choose
station3. Long press it to define station number to
be "3"; When it is on USB/SD playing, short press it
for repeat playing.
8. 4 / RDM
When it is on radio mode, short press it to choose
station4. Long press it to define station number to
be "4"; When it is on USB/SD playing, short press it
for random playing.
9. 5 / -10
When it is on radio mode, short press it to choose
station5. Long press it to define station number to
be "5"; When it is on USB/SD playing, short press it
for -10 tracks.
10. 6 / +10
When it is on radio mode, short press it to choose
station6. Long press it to define station number to
be "6"; When it is on USB/SD playing, short press
it for +10 tracks.
11. AF
When the unit is on, short press it for AF on/off
12. AMS
When it is on radio station, short press it to
browse stations.
13. SEL
SELECT Multi-functional button
14. Mute
For Mute
15. TA
Press it for TA on/off
16. PTY
When it is on RDS radio model, It is for PTY
function selection.
17. VOL+
For volume +/-
18. BAND
When it is on radio station, short press it for band
switch.
19. 7 Previous / 8 Next
When it is on radio model, short press it for station
scan;
When it is on USB/SD playing, Short press it for
previous or next tracks.
Long press it for fast forward or fast backward.
When it is on Bluetooth music mode, press it for
previous or next track.
RMD

SPECIFICATIONS

General:
Power supply
Max power output
RMS power output
Suitable speaker impedance
Fuse
Dimensions (WxDxH)
Radio:
FM Stereo Radio
Frequency range
Signal/noise ratio
Radio sensitivity
DAB Stereo Radio
Frequency range
Antenna type
USB / SD:
Frequency response
Signal/noise ratio
T.H.D.
USB charge output
Transmission
Bluetooth Freq range:
Max e.r.p:
Note:
Specifications and the design are subject to change without notice due to improvements in technology.
We are continuously improving/updating our products and product information.
It's therefore possible that there is a slight difference between the description in this manual to the operation
of the product. If something is different or not clear; always check our website for the most current version.
12V DC
neg. ground
75Wx4 channels
20Wx4 channels
(4Ω 10% T.H.D.)
4-8 ohm
10A
190x133x59mm (outer sizes)
178x108x50mm (built-in part)
87.5-108.0 MHz
(Europe)
50dB
10dB
174 ~ 240MHz
Screen mount / male SMA connector / active
(with +5V phantom power source)
20Hz-20KHz
>50dB
<3%
(1KHz)
5V, max. 1.1A
2402-2480 Mhz
<100mW/20dBm