Table of Contents
Advertisement
INSTALLATION
PRECAUTIONS
• Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the
driver.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air
from the heater, or where it would be subject to dust, dirt or excessive vibration.
• Use only the supplied mounting hardware for a safe and secure installation.
• Be sure to remove the front panel before installing the unit.
Mounting angle adjustment
Adjust the mounting angle to less than 0°.
MOUNTING EXAMPLE
Installation in the dashboard
1
1
Release screw and
bracket
2
Note: Keep the release key in a safe place as you may need it in the future to remove the unit from the car.
TO SUPPORT THE UNIT
Dashboard
2
10
1
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit from being stolen.
FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL
Before detaching the front panel, be sure to press the
Then press the
button, let the Front Panel arrive in horizontal position and detach the panel by pulling it
towards you as illustrated.
2
3
3
4
5
3
TAP
182mm
53mm
Bend these
claws, if necessary
4
6
8
7
5
6
9
button (1) to OFF first.
1
EN-3
4
1. UNIT
2. RELEASE CASE
3. DASH BOARD
4. HEX NUT
5. LOCK WASHER
6. PLAIN WASHER
7. CAR BODY
8. REAR SUPPORT STRAP
9. TAPPING SCREW
10. M5 X 15 HEX BOLT
4
< 10°
2
Advertisement
Table of Contents
