Table of Contents
Advertisement
HOW TO SELECT MP3/WMA FILES
1.
Searching by Track:
•
Press "A/PS", then search track is activated.
•
Turn "VOL" knob to left or right, select first digit desired.
•
Press "VOL" knob, then the first digit is fixed and second digit will flash.
•
Turn "VOL" knob to left or right, select 'nd 3'rd respectively.
•
Press "BD/ENT", the song selected will start.
2.
Searching by Character:
•
Press "A/PS" twice, then character search mode is activated.
•
Turn "VOL" knob to left or right, you can select the desired letter.
•
Press "VOL" knob, repeat steps above for 'nd 3'rd character.
•
The songs with the same character that you selected is displayed.
•
Turn "VOL" knob to left or right, you can select the desired song.
•
Press "BD/ENT", then the song selected will start.
3.
Searching by File Name:
•
Press "A/PS" 3 times, then folder search is activated.
•
Turn "VOL" knob to left or right, you can select the desired folder.
•
Press "BD/ENT", then the folder is fixed and the first file will be played.
24, 25. USB/SD/MMC Memory Card
The device is equipped with a USB interface and a memory card reader for SD/MMC cards.
MP3 or WMA files stored on these media can be played.
1. Plug your USB storage medium into the USB port.
. If you use a memory card, insert it into the memory card reader.
3. The player automatically switches to the input used and starts playback.
4. See the section on operations common for audio files on how to control USB or memory card playback.
Note:
• Due to the great variety of devices with USB and SD/MMC card interfaces that sometimes have manufacturer-
specific functions, we cannot guarantee that all media will be recognized and that all operational functions will be
available with this device.
• You cannot operate USB hard drives on the device.
26. Connecting AUX IN
An external audio source (e.g. portable MP3 player) can be connected to the AUX IN socket to be played back by the
vehicle loudspeakers.
• Connect the AUX IN socket with the audio output of the external device.
HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
How to Perform Pairing
Before you can dial out from the car stereo, you must first perform PAIRING. Pairing is a procedure used to connect 2
Bluetooth devices together.
1. This unit's Bluetooth function is always on, perform the pairing starting from your cellular phone. Refer to your cellular
manual on proper pairing.
2. Perform the search for available Bluetooth devices, "CAR--BT " will show. Enter '0000' when asking for code.
3. After successful pairing, connect to the head unit if it is not automatically connected.
How to call / receive calls using wired remote controller
• When there is incoming call, press TALK button once to answer.
• During conversation, press TALK button once to end call.
• To make calls using call history
1. Press and hold TALK button to display "REDIAL" history.
2. Using VOL knob on main unit, turn repeatedly to select the phone number you want to make
call to and press "
Note: Up to 20 phone numbers will be displayed including previous outgoing and incoming calls.
How to call / receive calls using wireless remote controller
• To make calls, press "
number keys.
• After entering TEL NO, press "
• During conversation, press "
• When there is incoming call, press "
• Press "
" button to reject incoming calls.
How to make / receive calls using front panel
• To make calls using call history
1. Press and hold "
2. Using VOL knob on main unit, turn repeatedly to select the phone number you want to make call to and press "
to dial out.
" to dial out.
" button on the remote controller followed by pressing TEL NO using
" again to dial out.
" button to end call.
" button to receive call.
" to display "REDIAL" history.
EN-7
TALK BUTTON
MICROPHONE
"
Advertisement
Table of Contents
